Crocpad takes pride in providing high-quality inflatable products designed to last. However, accidents can happen, and small tears or leaks are sometimes unavoidable. The good news? All Crocpad inflatable products come with a repair kit that includes PVC patches and glue, so you can easily fix your item and extend its lifespan. Follow these simple steps to repair a leak or hole in your inflatable product:
Step 1: Locate the Leak or Hole
The first step is identifying the exact location of the damage. Inflate your product slightly and listen for hissing sounds or feel for escaping air. If the leak is not immediately obvious, apply soapy water to the surface and look for bubbles forming where the air escapes.
Step 2: Prepare the Patch
Cut a patch from the provided PVC material that is at least ½ inch larger than the tear on all sides. This ensures a secure seal around the damaged area. Round the edges of the patch to prevent it from peeling off over time.
Step 3: Apply Glue
Spread a small amount of the included glue evenly on the back of the patch. Be careful not to use too much glue, as excess adhesive can cause the patch to slip or fail to bond correctly.
Step 4: Attach the Patch
After making sure the surface is dry, carefully place the patch over the tear or hole, ensuring the damaged area is completely covered. Press down firmly and smooth out any air bubbles to create a tight seal.
Step 5: Secure the Patch
To ensure the patch adheres properly, place a heavy and flat object—like a book or a weight—on top of it. This will keep the patch in place and allow the glue to bond securely.
Step 6: Allow the Glue to Dry
Patience is key! Allow the glue to dry for at least 12 hours before using the product again. This drying period ensures a strong and durable repair.
Tips for a Successful Repair:
-
Clean the Surface: Before applying the patch, clean the damaged area with a mild soap and water solution to remove dirt, grease, or debris that could interfere with adhesion.
-
Work in a Controlled Environment: Perform the repair in a clean, dry, and dust-free environment to achieve the best results.
-
Inspect Before Use: After the glue has dried, inspect the repaired area by inflating the product fully and checking for any air leaks.
By following these steps, you can restore your Crocpad inflatable product to its original functionality and continue enjoying it for years to come. If you need further assistance, don’t hesitate to reach out to Crocpad’s customer support team for guidance.